We use cookies in order to guarantee the best possible service. If you continue browsing the site you consent to our cookie use.

AR-2500A225A 2500 Watt CW, 10 kHz - 225 MHz

FREQUENCY RESPONSE: 10 kHz to 225 MHz instantaneously

RATED OUTPUT POWER:

  • Typical: 2800 watts, min 2500 watts, .01-100MHz
  • Typical: 2300 watts, min 2000 watts, 100-225MHz

INPUT FOR RATED OUTPUT: 1.0 mW Max

POWER OUTPUT @ 3dB COMPRESSION:

  • Typical: 2800 watts, min 2500 watts, .01-100MHz
  • Typical: 2300 watts, min 2000 watts, 100-225MHz

POWER OUTPUT @ 1dB COMPRESSION:

  • Typical: 2400 watts, min 2000 watts, .01-100MHz
  • Typical: 1900 watts, min 1500 watts, 100-225MHz

FLATNESS: ±2.0 dB typical, ±2.5 dB maximum

GAIN (at maximum setting): 64 dB minimum

GAIN ADJUSTMENT (continuous range): 20 dB minimum

INPUT IMPEDANCE: 50 ohms, VSWR 1.5:1 maximum

OUTPUT IMPEDANCE: 50 ohms, nominal

MISMATCH TOLERANCE: 100% of rated power without foldback up to 6.0:1 mismatch, above which may limit to 1250W reflected power.

HARMONIC DISTORTION: -20 dBc maximum at 3000 W

Remote Interfaces:

  • IEEE-488, 24 pin female
  • RS-232, 9 pin Subminiature D (female)
  • Fiber Optic, ST Conn Tx and Rx RS-232
  • USB 2.0, Type B

 

Product Number:

AR-2500A225A

Manufacturer:

Amplifier Research

Quantity:

Total
Unit price
base price
Stock
Call or email for delivery time

The Model 2500A225A is a solid-state, selfcontained, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The amplifier is air-cooled using internal selfcontained liquid cooling for high performance and reliability. A stylish, contemporary enclosure allows for easy portability.

The Model 2500A225A, when used with a sweep generator, will provide a minimum of 2500 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 2500A225A is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm.

The RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure. The Model 2500A225A is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen display to indicate the operate status and fault conditions if an overtemperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared.

All amplifier control functions and status indications are available remotely through the included Remotes Package. The Remotes Package includes GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet.

Description
Additional Informations
Reviews
Query on the Item?
Do you have any questions on this item?
Your E-mail Address
My Question:
Please retype the letters shown here
captcha
Description
Reviews
Query on the Item?

The Model 2500A225A is a solid-state, selfcontained, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The amplifier is air-cooled using internal selfcontained liquid cooling for high performance and reliability. A stylish, contemporary enclosure allows for easy portability.

The Model 2500A225A, when used with a sweep generator, will provide a minimum of 2500 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 2500A225A is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm.

The RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure. The Model 2500A225A is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen display to indicate the operate status and fault conditions if an overtemperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared.

All amplifier control functions and status indications are available remotely through the included Remotes Package. The Remotes Package includes GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet.

Do you have any questions on this item?
Your E-mail Address
My Question:
Please retype the letters shown here
captcha