Current probes

Oscilloscope Probe Selection Guide

Keysight Probe Resource Center

AC/DC Hall-Effect (Clamp-On) Current Probes
Model	Bandwidth	Max Current	Conversion Factor (Attenuation)	Min Scope Vertical Scale	Probe-to-Scope Interface	Power Source
N7026A	150 MHz	40 A-Pk¹, 30 A-RMS (1)	1 V/A (1:1), 0.2 V/A (5:1)²	1 mA/div	AutoProbe¹	Oscilloscope
N2893A	100 MHz	30 A-Pk³, 24 A-RMS (3)	0.1 V/A (10:1)	10 mA/div	AutoProbe¹	Oscilloscope
N2783B	100 MHz	50 A-Pk, 30 A-RMS	0.1 V/A (10:1)	10 mA/div	BNC	N2779A
1147B	50 MHz	30 A-Pk³, 24 A-RMS³	0.1 V/A (10:1)	10 mA/div	AutoProbe1	Oscilloscope
N2782B	50 MHz	50 A-Pk, 30 A-RMS	0.1 V/A (10:1)	10 mA/div	BNC	N2779A
N2781B	10 MHz	300 A-Pk, 150 A-RMS	0.01 V/A (100:1)	100 mA/div	BNC	N2779A
N2780B	2 MHz	700 A-Pk, 500 A-RMS	0.01 V/A (100:1)	100 mA/div	BNC	N2779A
1146B	100 kHz	100 A-Pk, 100 A-RMS	0.1 V/A (10:1), 0.01 V/A (100:1)⁴	10 mA/div	BNC	9 V Battery

AC-Only Rogowski Current Probes
Model	Bandwidth	Max Current	Conversion Factor (Attenuation)	Probe-to-Scope Interface	Power Source
N7042A	9.2 Hz- 30 MHz	300 A-Pk	0.02 V/A (50:1)	BNC	AC power adapter or 4x AA batteries
N7041A	12 Hz - 30 MHz	600 A-Pk	0.01 V/A (100:1)	BNC	AC power adapter or 4x AA batteries
N7040A	3 Hz - 23 MHz	3000 A-Pk	0.002 V/A (500:1)	BNC	AC power adapter or 4x AA batteries

High-Sensitivity AC/DC R-Shunt Current Probes
Model	Bandwidth	Current Range⁵	Gain	Channels	Probe Heads (Standard)	Probe-to-Scope Interface	Power Source
N2820A	Zoom-out: 3 MHz Zoom-in: 500 kHz	Zoom-out: 5 A Zoom-in: 50 µ A	Zoom-out: 1.97 Zoom-in: 300	2	20 mΩ, 100 mΩ, User-defined	AutoProbe1	Oscilloscope
N2821A	Zoom-out: 3 MHz Zoom-in: 500 kHz	Zoom-out: 5 A Zoom-in: 50 µ A	Zoom-out: 1.97 Zoom-in: 300	1	20 mΩ, 100 mΩ, User-defined	AutoProbe1	Oscilloscope

When using a power adapter booster (standard). 15 A-Pk, 5 V-RMS without oscilloscope-provided power only. An MXR/EXR enables max current range without using the power adapter.
Auto-selected based on Amps/division setting.
The maximum number of current probes supported by InfiniiVision oscilloscopes is limited depending on the oscilloscope. Infiniium oscilloscopes have no limitations.
Manually selectable.
A wider input range is possible when using the user-defined head and Rsense.