Keysight B2987C Electrometer/High Resistance Meter, 0.01 fA, 1000 V, Battery
Key Features and Functions
- 0.01 fA (10-17 A) minimum measurement resolution and 2 pA to 20 mA current measurement ranges with 6.5 digits resolution
- < 20 μV burden voltage in its lowest current range
- High speed reading rate up to 20,000 rdg/s
- Battery operation models for line noise free measurements
- Built-in ± 1,000 V voltage source
- Measurement resistances up to 10 PΩ (1016 Ω)
- > 200 TΩ input impedance for up to 20 V voltage measurement
- Independent current and voltage measurement
- Charge measurement down to 2 nC range with 6.5 digits resolution
- Temperature and humidity measurements
- Graphical viewing modes (Meter, Graph, Histogram and Roll View)
- Versatile interface (USB 2.0: LAN, GPIB, LXI Core)
- USB (front): store data, save/recall setup information
- Free PC control software
Documents and Links:
Highlights
Maximize Your Measurement Confidence
The Keysight Femto / Picoammeters and Electrometers / High Resistance Meters offer measurement performance and unprecedented features to maximize your measurement confidence. The Femto / Picoammeters and Electrometers both offer 0.01 fA (0.01 x 10-15 A) minimum current resolution, which meets virtually all existing and future low-level current measurement needs. The Electrometers feature a 1,000 V voltage sourcing capability that supports up to 10 PΩ (10 x 1015 Ω) resistance measurements. Both of the Femto / Picoammeter and Electrometer have battery powered versions to eliminate AC power line noise, providing unmatched level of noise reduction, enabling low-level measurements that were previously impossible.
- Measure resistance up to 10 PΩ (10 x 1015 Ω)
- Get a picoammeter and electrometer in battery-powered versions
- Eliminate the AC power line noise when making low-level measures
- Analyze chart results using the 4.3” liquid crystal display that supports a variety of viewing modes — numeric, trend chart, and histogram)
- Select the appropriate measurement using the built-in real-time noise monitor
- Capture transient device and material behavior perform a quick statistical analyses
- Isolate the cause of noise from external setups (cables, connectors, adapters, chambers) with the Keysight optional setup integrity checker
Highlights
Maximize Your Measurement Confidence
The Keysight Femto / Picoammeters and Electrometers / High Resistance Meters offer measurement performance and unprecedented features to maximize your measurement confidence. The Femto / Picoammeters and Electrometers both offer 0.01 fA (0.01 x 10-15 A) minimum current resolution, which meets virtually all existing and future low-level current measurement needs. The Electrometers feature a 1,000 V voltage sourcing capability that supports up to 10 PΩ (10 x 1015 Ω) resistance measurements. Both of the Femto / Picoammeter and Electrometer have battery powered versions to eliminate AC power line noise, providing unmatched level of noise reduction, enabling low-level measurements that were previously impossible.
- Measure resistance up to 10 PΩ (10 x 1015 Ω)
- Get a picoammeter and electrometer in battery-powered versions
- Eliminate the AC power line noise when making low-level measures
- Analyze chart results using the 4.3” liquid crystal display that supports a variety of viewing modes — numeric, trend chart, and histogram)
- Select the appropriate measurement using the built-in real-time noise monitor
- Capture transient device and material behavior perform a quick statistical analyses
- Isolate the cause of noise from external setups (cables, connectors, adapters, chambers) with the Keysight optional setup integrity checker