Hioki-PW3365-20 CLAMP ON POWER LOGGER

Hioki Clamp On Power Meters are multi-channel power measuring devices utilizing clamp sensor input to accurately and safely measure power on single-phase to three-phase lines. The PW3365 power logger takes safety and convenience one step further by being the world’s first non-metallic contact power meter that utilizes completely covered voltage clips that can be attached to any part of a cable or busbar. Customers can now monitor power demand and other power parameters to aid in energy audits and validate energy saving measures without risk of short-circuit accidents, power interruptions, or bodily injury due to electrocutions.

Basic specifications

• Measurement line & number of circuits: 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels
• Measurement items: Voltage RMS, current RMS, voltage fundamental wave value, current fundamental wave value, voltage fundamental wave phase angle, current fundamental wave phase angle, frequency (U1), voltage waveform peak (absolute value), current waveform peak (absolute value), active power, reactive power, apparent power, power factor (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration), reactive energy (lag, lead), energy cost display, active power demand quantity (consumption, regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand
• Voltage ranges: 400 V AC (Effective measurement range: 90.0 V to 520.0 V)
• Harmonic: Harmonic voltage, harmonic current, voltage total harmonic distortion (THD-F or THD-R), current total harmonic distortion (THD-F or TDH-R), up to 13th order
• Current ranges:
• 500.00 mA to 5.0000 kA AC (depends on current sensor in use),
• 50.000 mA to 5.0000 A AC (Leak clamp on sensor only)
• Power ranges: 200.00 W to 6.0000 MW (depends on voltage/current combination and measured line type)
• Basic accuracy: Voltage :
• ±1.5% rdg. ±0.2% f.s(combined accuracy with PW3365-20 + PW9020)
• Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy
• Active power : ±2.0% rdg. ±0.3% f.s. + clamp sensor accuracy (at power factor = 1)
• Display update rate: 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication)
• Save destination: SD/SDHC Memory card, or internal memory at real time
• Data save interval: 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections
• Save items:
• Measurement value save: Average only / Average, Maximum, Minimum value
• Screen copy: BMP form (saved every 5 min. at minimum interval time)
• Waveform save: Binary waveform data
• Interfaces: SD/SDHC memory card, LAN 100BASE-TX: HTTP server function, remote settings via communication program, data download, USB 2.0: When connected to a PC, the SD Card and internal memory are recognized as removable storage devices, remote settings via communication program, data download
• Functions: Connection check, Quick Set navigation guide, clock

• PDF
• Compare this item

Hioki Clamp On Power Meters are multi-channel power measuring devices utilizing clamp sensor input to accurately and safely measure power on single-phase to three-phase lines. The PW3365 power logger takes safety and convenience one step further by being the world’s first non-metallic contact power meter that utilizes completely covered voltage clips that can be attached to any part of a cable or busbar. Customers can now monitor power demand and other power parameters to aid in energy audits and validate energy saving measures without risk of short-circuit accidents, power interruptions, or bodily injury due to electrocutions.

Basic specifications

• Measurement line & number of circuits: 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels
• Measurement items: Voltage RMS, current RMS, voltage fundamental wave value, current fundamental wave value, voltage fundamental wave phase angle, current fundamental wave phase angle, frequency (U1), voltage waveform peak (absolute value), current waveform peak (absolute value), active power, reactive power, apparent power, power factor (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration), reactive energy (lag, lead), energy cost display, active power demand quantity (consumption, regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand
• Voltage ranges: 400 V AC (Effective measurement range: 90.0 V to 520.0 V)
• Harmonic: Harmonic voltage, harmonic current, voltage total harmonic distortion (THD-F or THD-R), current total harmonic distortion (THD-F or TDH-R), up to 13th order
• Current ranges:
• 500.00 mA to 5.0000 kA AC (depends on current sensor in use),
• 50.000 mA to 5.0000 A AC (Leak clamp on sensor only)
• Power ranges: 200.00 W to 6.0000 MW (depends on voltage/current combination and measured line type)
• Basic accuracy: Voltage :
• ±1.5% rdg. ±0.2% f.s(combined accuracy with PW3365-20 + PW9020)
• Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy
• Active power : ±2.0% rdg. ±0.3% f.s. + clamp sensor accuracy (at power factor = 1)
• Display update rate: 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication)
• Save destination: SD/SDHC Memory card, or internal memory at real time
• Data save interval: 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections
• Save items:
• Measurement value save: Average only / Average, Maximum, Minimum value
• Screen copy: BMP form (saved every 5 min. at minimum interval time)
• Waveform save: Binary waveform data
• Interfaces: SD/SDHC memory card, LAN 100BASE-TX: HTTP server function, remote settings via communication program, data download, USB 2.0: When connected to a PC, the SD Card and internal memory are recognized as removable storage devices, remote settings via communication program, data download
• Functions: Connection check, Quick Set navigation guide, clock

• PDF
• Compare this item