Hioki-PW6001 POWER ANALYZER
DC, 0.1 Hz to 2 MHz, 3-phase 4-wire, High Precision Power Analyzer for Motor and Inverter Efficiency Analysis
Key Features and Functions
- Exclusive current sensor phase shift function lets you maintain accuracy even in high frequency, low power factor applications
- Basic accuracy of ±0.02%*1 for power measurement
*1 PW6001 accuracy only. Instrument delivers accuracy of ±0.07% even after the current sensor accuracy has been added. - High noise resistance and stability (80 dB/100 kHz CMRR, ±0.01%/°C temperature characteristics)
- Accurate measurement even when the load is characterized by large fluctuations; TrueHD 18-bit resolution
- 10 ms data refresh while maintaining maximum accuracy (using a specially designed IC to make all measurements independently while performing simultaneous calculations.)
- DC accuracy of ±0.07%, which is key for stable, accurate efficiency measurement
- Wide frequency bandwidth of DC, or 0.1 Hz to 2 MHz
- Achieve true frequency analysis with high-speed 5MS/s sampling (18 bit)
- Synchronize 2 units for up to 12 channels*2 in real time
*2 Two 6-channel models can be connected with an optical connection cable - Special triggers to enable waveform analysis and motor analysis without the need for an oscilloscope
- Wideband harmonic analysis up to the 100th order with a 1.5 MHz band
- Send measured values to HIOKI data loggers using a Bluetooth® wireless technology compatible adapter (LR8410 Link-compatible products), Ver. 2.0 and later
Documents and Software:
Stock
Call or email for delivery time
Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The PW6001 is Hioki’s flagship power analyzer, featuring high accuracy, wide band, and high stability for measuring electrical power from DC to inverter frequencies, providing maximum of 12 channels* to support single- and three-phase inverter motor system measurements and next generation devices such as silicon-carbide (SiC) inverters. *When synchronizing two 6-channel models connected via optical link
Basic specifications
- Measurement line type: Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire
- Number of input channels: Max. 6 channels; each input unit provides 1 channel for simultaneous voltage and current input
- (Voltage measurement unit: Photoisolated input, resistance voltage divider, Current measurement unit: Isolated input from current sensor)
- Measurement items:
- Voltage (U), current (I), active power (P), apparent power (S), reactive power (Q), power factor (λ), phase angle (φ), frequency (f), efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk)
- Harmonic measurement: Harmonic active power, select calculation order
- from 2nd order to 100th order
- Waveform recording: Voltage and current waveforms/ Motor pulse: Always 5 MS/s
- Motor waveforms: Always 50 kS/s, 16 bits
- Recording capacity: 1 Mword × ((voltage + current) × number of channels + motor
- waveforms)
- Motor analysis (PW6001-11 to -16 only): Voltage, Torque, Rotation, Frequency, Slip, or Motor output
- Measurement range:
- Voltage range: 6 to 1500 V, 8 ranges
- Current range (Probe 1) : 400 mA to 1 kA (depends on current sensor)
- Current range (Probe 2) : 100 mA to 50 kA (depends on current sensor)
- Power range: 2.40000W to 4.50000MW (depends on combination of voltage and current range)
- Frequency range: 0.1 Hz to 2 MHz
- Basic accuracy:
- Voltage: ±0.02 % rdg. ±0.02 % f.s.
- Current: ±0.02 % rdg. ±0.02 % f.s. + current sensor accuracy
- Active power: ±0.02 % rdg. ±0.03 % f.s. + current sensor accuracy
- Synchronization frequency range:
- Power measurement: 0.1 Hz to 2 MHz
- Harmonic measurement: 45 Hz to 66 Hz (IEC standard mode), 0.1 Hz to 300 kHz (Wideband mode)
- Frequency band: DC, 0.1 Hz to 2 MHz
- Data update rate:
- Power measurement: 10 ms/ 50 ms/ 200 ms
- Harmonic measurement: 200 ms (IEC standard mode), 50 ms (Wideband mode
- Data save interval:
- OFF, 10 msec to 500 msec, 1 sec to 30 sec, 1 minute to 60 minutes
- User-selected from all measured values, including harmonic measured values,
- Specified measured values can be saved in internal memory or USB flash drive
- External interfaces: USB (memory), LAN, GP-IB, RS-232C (for communication/LR8410 link), External control ,Synchronization control
- Logger connectivity: Sends measured values wirelessly to logger by using a Bluetooth® wireless technology serial conversion adapter. (Supported devices: Hioki LR8410 Link-compatible loggers), Ver. 2.0 and later
Description
Additional Informations
Reviews
Query on the Item
Do you have any questions on this item?
Description
Reviews
Query on the Item
Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The PW6001 is Hioki’s flagship power analyzer, featuring high accuracy, wide band, and high stability for measuring electrical power from DC to inverter frequencies, providing maximum of 12 channels* to support single- and three-phase inverter motor system measurements and next generation devices such as silicon-carbide (SiC) inverters. *When synchronizing two 6-channel models connected via optical link
Basic specifications
- Measurement line type: Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire
- Number of input channels: Max. 6 channels; each input unit provides 1 channel for simultaneous voltage and current input
- (Voltage measurement unit: Photoisolated input, resistance voltage divider, Current measurement unit: Isolated input from current sensor)
- Measurement items:
- Voltage (U), current (I), active power (P), apparent power (S), reactive power (Q), power factor (λ), phase angle (φ), frequency (f), efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk)
- Harmonic measurement: Harmonic active power, select calculation order
- from 2nd order to 100th order
- Waveform recording: Voltage and current waveforms/ Motor pulse: Always 5 MS/s
- Motor waveforms: Always 50 kS/s, 16 bits
- Recording capacity: 1 Mword × ((voltage + current) × number of channels + motor
- waveforms)
- Motor analysis (PW6001-11 to -16 only): Voltage, Torque, Rotation, Frequency, Slip, or Motor output
- Measurement range:
- Voltage range: 6 to 1500 V, 8 ranges
- Current range (Probe 1) : 400 mA to 1 kA (depends on current sensor)
- Current range (Probe 2) : 100 mA to 50 kA (depends on current sensor)
- Power range: 2.40000W to 4.50000MW (depends on combination of voltage and current range)
- Frequency range: 0.1 Hz to 2 MHz
- Basic accuracy:
- Voltage: ±0.02 % rdg. ±0.02 % f.s.
- Current: ±0.02 % rdg. ±0.02 % f.s. + current sensor accuracy
- Active power: ±0.02 % rdg. ±0.03 % f.s. + current sensor accuracy
- Synchronization frequency range:
- Power measurement: 0.1 Hz to 2 MHz
- Harmonic measurement: 45 Hz to 66 Hz (IEC standard mode), 0.1 Hz to 300 kHz (Wideband mode)
- Frequency band: DC, 0.1 Hz to 2 MHz
- Data update rate:
- Power measurement: 10 ms/ 50 ms/ 200 ms
- Harmonic measurement: 200 ms (IEC standard mode), 50 ms (Wideband mode
- Data save interval:
- OFF, 10 msec to 500 msec, 1 sec to 30 sec, 1 minute to 60 minutes
- User-selected from all measured values, including harmonic measured values,
- Specified measured values can be saved in internal memory or USB flash drive
- External interfaces: USB (memory), LAN, GP-IB, RS-232C (for communication/LR8410 link), External control ,Synchronization control
- Logger connectivity: Sends measured values wirelessly to logger by using a Bluetooth® wireless technology serial conversion adapter. (Supported devices: Hioki LR8410 Link-compatible loggers), Ver. 2.0 and later
Do you have any questions on this item?