We use cookies in order to guarantee the best possible service. If you continue browsing the site you consent to our cookie use.

Hioki-CT6710 CURRENT PROBE, DC to 50 MHz, 30 Arms

Capture Inrush, Micro and High-Speed Currents with a Single Probe

Key Features and Functions

  • 3 ranges in a single probe - 30 A, 5 A, 0.5 A.  Observe a wide current range from micro currents to 30 A.
  • Wide band: DC to 50 MHz (-3 dB)
  • High S/N ratio and 10 times output rate: Observe waveforms at 100 μA/div at oscilloscope maximum voltage sensitivity setting of 1 mV/div
  • Directly connect to an oscilloscope’s BNC input terminal *1
  • Also available: CT6711 Current Probe with DC to 120 MHz bandwidth

Documents and Software:

Product Number:

Hioki-CT6710

Manufacturer:

Hioki

Quantity:

Total
Unit price
base price
Stock
Call or email for delivery time

Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The CT6710 is a 3-range, high-sensitivity current probe that offers a wide DC to 50 MHz bandwidth and 200 μA to 30 A input, letting your capture signals across an expansive current range, from steady state to transient currents, when developing switching power supplies, inverters, and motor controllers.  

Key Specifications:

  • Frequency bandwidth: DC to 50 MHz (-3 dB)
  • Rise time: 7.0 ns or shorter
  • Delay time (Typical):
    • 30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns
      (Delay time relative to rising waveform of input signal 1 ns)
  • Noise level: 75 μA rms max (at 0.5 A range, using 20 MHz band measuring instrument)
  • Max. rated current: 30 A range:
    • 30 A rms, 5 A range: 5 A rms, 0.5 A range: 0.5 A rms
      (DC, and sine wave, requires derating at frequency)
  • Max. allowable peak current:
    • 30 A range: ±50 A peak (within the input limit time 2 s)
    • 5 A range: ± 7.5 A peak,
    • 0.5 A range: ± 0.75 A peak (< 10 MHz), ±0.3 A peak (≥ 10 MHz)
  • Amplitude accuracy:
    • 30 A range: ±3.0% rdg. ±1 mV, (Typical) ±1.0% rdg. ±1 mV (≤ 10 Arms, DC, 45 to 66 Hz sine wave, within the maximum peak current of each range)
    • 5 A range: ±3.0% rdg. ±1 mV, (Typical) ±1.0% rdg. ±1 mV (DC, 45 to 66 Hz sine wave, within the maximum peak current of each range)
    • 0.5 A range: ±3.0% rdg. ±10 mV, (Typical) ±1.0% rdg. ±10 mV (DC, 45 to 66 Hz sine wave, within the maximum peak current of each range)
  • Output rate: 30 A range: 0.1 V/A, 5 A range: 1 V/A, 0.5 A range: 10 V/A, (The output of this probe is internally terminated, so connect to voltage input equipment with high input impedance such as 1MΩ)
  • Measurable conductors: φ 5 mm (0.20 in), Insulated conductor
  • Power supply: Supplied from Power Supply 3269, Probe Power Unit Z5021
Description
Additional Informations
Reviews
Query on the Item
Do you have any questions on this item?
Your E-mail Address
My Question:
Please retype the letters shown here
captcha
Description
Reviews
Query on the Item

Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The CT6710 is a 3-range, high-sensitivity current probe that offers a wide DC to 50 MHz bandwidth and 200 μA to 30 A input, letting your capture signals across an expansive current range, from steady state to transient currents, when developing switching power supplies, inverters, and motor controllers.  

Key Specifications:

  • Frequency bandwidth: DC to 50 MHz (-3 dB)
  • Rise time: 7.0 ns or shorter
  • Delay time (Typical):
    • 30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns
      (Delay time relative to rising waveform of input signal 1 ns)
  • Noise level: 75 μA rms max (at 0.5 A range, using 20 MHz band measuring instrument)
  • Max. rated current: 30 A range:
    • 30 A rms, 5 A range: 5 A rms, 0.5 A range: 0.5 A rms
      (DC, and sine wave, requires derating at frequency)
  • Max. allowable peak current:
    • 30 A range: ±50 A peak (within the input limit time 2 s)
    • 5 A range: ± 7.5 A peak,
    • 0.5 A range: ± 0.75 A peak (< 10 MHz), ±0.3 A peak (≥ 10 MHz)
  • Amplitude accuracy:
    • 30 A range: ±3.0% rdg. ±1 mV, (Typical) ±1.0% rdg. ±1 mV (≤ 10 Arms, DC, 45 to 66 Hz sine wave, within the maximum peak current of each range)
    • 5 A range: ±3.0% rdg. ±1 mV, (Typical) ±1.0% rdg. ±1 mV (DC, 45 to 66 Hz sine wave, within the maximum peak current of each range)
    • 0.5 A range: ±3.0% rdg. ±10 mV, (Typical) ±1.0% rdg. ±10 mV (DC, 45 to 66 Hz sine wave, within the maximum peak current of each range)
  • Output rate: 30 A range: 0.1 V/A, 5 A range: 1 V/A, 0.5 A range: 10 V/A, (The output of this probe is internally terminated, so connect to voltage input equipment with high input impedance such as 1MΩ)
  • Measurable conductors: φ 5 mm (0.20 in), Insulated conductor
  • Power supply: Supplied from Power Supply 3269, Probe Power Unit Z5021
Do you have any questions on this item?
Your E-mail Address
My Question:
Please retype the letters shown here
captcha