Hioki-IM3590 CHEMICAL IMPEDANCE ANALYZER
For R & D applications of Electrochemical Components and Materials, Batteries, and EDLCs
Key Features and Functions
- Broad 1 mHz to 200 kHz signal source range supports measurements of ion behavior and solution resistance
- Continuous measuring and high-speed testing of LCR and sweep measurements with a single instrument
- Measure internal impedance of batteries with no load
- Perform high-speed sweep measurements in as little as 2 ms
- Basic accuracy of ±0.05% is ideal for applications from component testing to R&D
- Measure LCR impedance for Cole-Cole plots and equivalent-circuit analyses of electro-chemical components and materials
Documents and Software:
Stock
Call or email for delivery time
Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components.. The IM3590 impedance analyzer is an advanced component tester especially suited to electrochemical impedance measurements and includes a variety of graphing functions that are needed for battery and chemical material testing.
Key Specifications:
- Measurement modes: LCR mode, Continuous measurement mode (LCR mode / Analyzer mode), Analyzer mode (Sweeps with measurement frequency and measurement level, temperature characteristics, equivalent circuit analysis)
- Measurement parameters: Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp,
- D (tanδ), Q, T, σ (conductivity), ε (dielectric constant)
- Measurement range: 100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z)
- Display range:
- Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp, σ, ε :
- ±(0.00000 [unit] to 9.99999G [unit], Absolute value display for Z and Y only
- θ : ±(0.000° to 180.000°), D : ±(0.00000 to 9.99999)
- Q : ±(0.00 to 99999.9), Δ % : ±(0.0000% to 999.999%)
- T : -10.0°C to 99.9°C
- σ, ε :±(0.00000f [unit] to 999.999G [unit]
- Basic accuracy: Z: ±0.05% rdg. θ: ±0.03°
- Measurement frequency: 1 mHz to 200 kHz (5 digits setting resolution, minimum resolution 1 mHz)
- Measurement signal level:
- Normal mode:
- V mode/CV mode: 5 mV to 5 Vrms, 1 mVrms steps
- CC mode: 10 μA to 50 mArms, 10 μArms steps
- Low impedance high accuracy mode:
- V mode/CV mode: 5 mV to 2.5 Vrms, 1 mVrms steps
- CC mode:10 μA to 100 mArms, 10 μArms steps
- Output impedance: Normal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω
- Display: 5.7-inch color TFT, display can be set to ON/OFF
- Measurement time: 2 ms (1 kHz, FAST, display OFF, representative value)
- Functions: DC bias measurement, DC resistance temperature compensation (converted reference temperature is displayed), Temperature measurement, Battery mesurement (Automatic DC biasing system), Comparator, BIN measurement (classification), Panel loading/saving, Memory function
- Interfaces:
- EXT I/O (Handler), USB communication (high-speed), USB memory
- Optional: Choose 1 from RS-232C, GP-IB, or LAN
Description
Additional Informations
Reviews
Query on the Item
Do you have any questions on this item?
Description
Reviews
Query on the Item
Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components.. The IM3590 impedance analyzer is an advanced component tester especially suited to electrochemical impedance measurements and includes a variety of graphing functions that are needed for battery and chemical material testing.
Key Specifications:
- Measurement modes: LCR mode, Continuous measurement mode (LCR mode / Analyzer mode), Analyzer mode (Sweeps with measurement frequency and measurement level, temperature characteristics, equivalent circuit analysis)
- Measurement parameters: Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp,
- D (tanδ), Q, T, σ (conductivity), ε (dielectric constant)
- Measurement range: 100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z)
- Display range:
- Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp, σ, ε :
- ±(0.00000 [unit] to 9.99999G [unit], Absolute value display for Z and Y only
- θ : ±(0.000° to 180.000°), D : ±(0.00000 to 9.99999)
- Q : ±(0.00 to 99999.9), Δ % : ±(0.0000% to 999.999%)
- T : -10.0°C to 99.9°C
- σ, ε :±(0.00000f [unit] to 999.999G [unit]
- Basic accuracy: Z: ±0.05% rdg. θ: ±0.03°
- Measurement frequency: 1 mHz to 200 kHz (5 digits setting resolution, minimum resolution 1 mHz)
- Measurement signal level:
- Normal mode:
- V mode/CV mode: 5 mV to 5 Vrms, 1 mVrms steps
- CC mode: 10 μA to 50 mArms, 10 μArms steps
- Low impedance high accuracy mode:
- V mode/CV mode: 5 mV to 2.5 Vrms, 1 mVrms steps
- CC mode:10 μA to 100 mArms, 10 μArms steps
- Output impedance: Normal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω
- Display: 5.7-inch color TFT, display can be set to ON/OFF
- Measurement time: 2 ms (1 kHz, FAST, display OFF, representative value)
- Functions: DC bias measurement, DC resistance temperature compensation (converted reference temperature is displayed), Temperature measurement, Battery mesurement (Automatic DC biasing system), Comparator, BIN measurement (classification), Panel loading/saving, Memory function
- Interfaces:
- EXT I/O (Handler), USB communication (high-speed), USB memory
- Optional: Choose 1 from RS-232C, GP-IB, or LAN
Do you have any questions on this item?